Wednesday, October 5, 2011

Aprilia DiTech 50 Quick Workshop Manual

Aprilia DiTech 50 Quick Workshop Manual. If the engine must be switched on to carry out certain operations make sure the room is well ventilated or open to the outside. Never switch on the engine in a closed room, unless there is a smoke and fume removal system installed and the operating. The engine and parts of the exhaust system reach very high temperatures and remain hot for a certain period after switching off the engine. Handle these components only after putting on protective gloves or waiting for the engine and parts to fully cool down.Do not carry out any operation in the presence of naked flames. Before starting any maintenance or inspection operation, switch off the engine and remove the ignition key. Wait for the engine and exhaust system to cool down. Place the motor cycle, if possible, in a raised position on a level, even surface. Take special care of heated parts (engine and the exhaust) in order to avoid burns. The vehicle is made with parts which cannot be swallowed. Do not bite, chew, suck or otherwise attempt to carry out operations using the teeth or mouth.Unless otherwise specified, to reassemble parts, reverse the order for disassembly operations. Some operations may involve disassembling parts previously disassembled for other operations to be carried out. Consult the various pages of the manual where each operation is described in order to avoid unnecessary work. Never use fuel as a solvent for cleaning the vehicle. . If welding operations are to be carried out, disconnect the negative pole (-) of the battery and take special care with all electrical components used for the injection system. If more than one person is working on the vehicle make sure both are in a safe position whatever the work being done.


Download: Aprilia DiTech 50 Quick Workshop Manual